material specsYou may give us specs in ASTM, ANSI, SAE, DIN, BS. If you leave this field blank, please be sure to have it specified in your drawings.
We have listed common materials below for your reference.
Jump to: Cast Iron, Cast Steel, Stainless Steel, Aluminum, Copper, Zinc
| Chinese GB | German DIN | British BS | French NF | Sweden SS | USA ASTM | |
| Grey Iron | - | - | - | - | 01 00 | No20B |
| - | GG10 | - | Ft10D | 01 10 | No25B | |
| HT150 | GG15 | Grade150 | Ft15D | 01 15 | No30B | |
| HT200 | GG20 | Grade220 | Ft20D | 01 20 | No35B | |
| HT250 | GG25 | - | Ft25D | 01 25 | No40B | |
| HT300 | GG30 | Grade300 | Ft30D | 01 30 | No45B | |
| HT350 | GG35 | Grade350 | Ft35D | 01 35 | No50B | |
| HT400 | GG40 | Grade400 | Ft40D | 01 40 | No55B | |
| Alloy Grey Iron | - | GGL-NiCr202 | L-NiCr202 | L-NC202 | 05 23 | |
| Ductile cast iron | QT400-18 | GGG40 | SNG420/12 | FCS400-12 | 07 17-02 | 60-40-18 |
| - | GGG40.3 | SNG370/17 | FCS370-17 | 07 17-12 | - | |
| - | GGG35.3 | - | - | 07 17-15 | - | |
| QT500-7 | GGG50 | SNG500/7 | FCS500-7 | 07 27-02 | 80-55-06 | |
| QT600-3 | GGG60 | SNG600/3 | FCS600-3 | 07 32-03 | - | |
| QT700-18 | GGG70 | SNG700/2 | FCS700-2 | 07 37-01 | 100-70-03 | |
| Alloy Cast Iron | - | GGGNiMn137 | L-NiMn137 | L-NM137 | 07 72 | - |
| - | GGG NiCr202 | L-NiCr202 | L-NC202 | 07 76 | ||
| Malleable cast iron | - | 56 1/3 | MN31-8 | 08 14 | 100-70-03 | |
| KTH300-06 | GTS-35 | B340/12 | MN35-10 | 08 15 | 32510 | |
| KTZ450-06 | GTS-45 | P440/7 | - | 08 52 | 40010 | |
| KTZ50-4 | GTS-55 | P510/4 | MN35-10 | 08 54 | 50005 | |
| KTZ60-3 | GTS-65 | B570/12 | MP60-3 | 08 58 | 70003 | |
| KTZ70-2 | GTS-70 | B690/ | IP70-2 | 08 62 |
Carbon Steel Casting and Alloy Steel Casting Material
| Chinese | Japan | USA | Germany | France | UK | （ISO） | ||
| (GB) | (JIS) | ASTM | UNS | DIN | W-Nr. | (NF) | (BS) | |
| ZG200-400 | SC360 | — | J01700 | GS-38 | 1.0416 | E20-40M | AW1,CLA9 | 200-400 |
| GS-CK16 | 1.1142 | |||||||
| ZG230-450 | SC410 | LC8 | J03003 | GS-52 | 1.0551 | E23-45M | CLA1Gr.B | 230-450 |
| GS-CK25 | 1.1155 | |||||||
| ZG270-500 | SC480 | — | J04000 | GS-60 | 1.0553 | — | A2 | 270-480 |
| GS-62 | 1.0555 | |||||||
| ZG310-570 | SCC5 | 80-40 | J05002 | GS-70 | 1.0554 | — | A3 | 340-550 |
| GS-CK45 | 1.1191 | AW2 | ||||||
| ZG340-640 | — | — | J05000 | — | — | — | — | — |
| ZG40Mn | SCMn3 | — | — | GS-40Mn5 | 1.1168 | — | AW3 | — |
| ZG40Cr | — | — | — | — | — | — | — | — |
| ZG20SiMn | SCW480 | LCC | J02505 | GS-20Mn5 | 1.112 | FB-M | — | — |
| ZG35CrMn | SCSiMn2 | — | — | GS-37MnSi5 | 1.5122 | — | — | — |
| ZG35CrMo | SCCrM3 | — | J13048 | GS-34CrMo4 | 1.722 | — | — | — |
| ZG35CrMnSi | SCMnCr3 | — | — | — | — | — | — | — |
| — | SCMn2 | — | — | GS-30Mn5 | 1.1165 | — | — | — |
| — | SCMn3 | — | — | GS-36Mn5 | 1.1167 | — | — | — |
| SCPH11 | LC1 | J12522 | GS-22Mo4 | 1.5419 | FC1-M | 240,B1 | — | |
| SCPH21 | WC11 | J11872 | GS-17CrMo55 | 1.7357 | — | — | — | |
| SCPH32-CF | WC9 | J21890 | GS-12CrMo9 10 | 1.738 | — | 622,B3 | — | |
| SCPH61 | C5，CP5 | J42045 | GS-12CrMo19 5 | 1.7363 | — | 625,B5 | — | |
| SCPH23 | 9 | J21610 | GS-17CrMoV5 11 | 1.7706 | — | — | — | |
| — | SCPL21 | B2N | J22501 | GS-24Ni8 | 1.5633 | FC2-M | — | — |
| B2Q | J22500 | |||||||
| — | SCPL31 | B3N | J31500 | GS-10Ni14 | 1.5638 | FC3-M | BL2 | — |
| CLA10 | ||||||||
| — | — | B4N | J41501 | GS-10Ni19 | 1.5681 | — | — | — |
| B4Q | ||||||||
| ZGMn13-1 | — | B-4 | J91149 | G-×120Mn13 | 1.3802 | — | BW10 | — |
| B-3 | J91139 | |||||||
| ZGMn13-2 | B-2 | J91129 | G-×120Mn12 | 1.3401 | ||||
| A | J91109 | |||||||
| ZGMn13-3 | SCMnH1 | B-1 | J91119 | — | — | — | — | — |
| SCMnH2 | ||||||||
| ZGMn13-4 | SCMnH3 | |||||||
Stainless Steel Material
| Class | China | USA | Japan | Europe |
| Martensite Stainless | 1Cr13 | 410 | SUS410 | SAF2301 |
| 1Cr17Ni2 | 431 | SUS431 | SAF2321 | |
| 9Cr18 | 440C | SUS440c | ||
| 0Cr17Ni4Cu4Nb | 17-4PH | SUH630 | ||
| 1Cr12Ni3MoWV | XM32 | DIN1.4313 | ||
| 2Cr12MoVNbN | SUH600 | |||
| 2Cr12NiMoWV | SUH616 | |||
| Duplex Stainless | 00Cr18Ni5Mo3Si2 | S31500 | 3RE60 | |
| 00Cr22Ni5Mo3N | S31803 | 329J3L1 | SAF2205 | |
| 00Cr25Ni6Mo2N | 329J1L1R-4 | |||
| 00Cr25Ni7Mo3N | S31260 | 329J4L | SAF2507 | |
| 00Cr25Ni6Mo3CuN | S32550 | |||
| Special Stainless Alloy | ZG40Cr25Ni20 | HK | ||
| ZG45Ni35Cr27N6 | KP | |||
| ZG50N148Cr28W5 | ||||
| ZGN136Cr26Co15W5 | ||||
| ZG10Ni32Cr20Nb | ||||
| ZG45Ni48Cr28W5Co5 | ||||
| Ferritic Stainless | 0Cr13 | 410S | SUS410S | |
| 00Cr17Ti | ||||
| 00Cr18Mo2Ti | ||||
| Austenite Stainless | 0Cr18Ni9Ti | 321 | SUS321 | SAF2337 |
| 00Cr19Ni10 | 304L | SUS304L | ||
| 0Cr17Ni12Mo2 | 316 | SUS316 | SAF2343 | |
| 0Cr17Ni14Mo2 | 316L | SUS312L | ||
| 00Cr19Ni13Mo3 | 317L | SUS317L | ||
| ZG00Cr19Ni10 | CF3 | SCS19A | ||
| ZG00Cr17Ni14Mo2 | CF3M | SCS16A | ||
| 0Cr25Ni20 | 310S | SUS310S | ||
| 00Cr20Ni18Mo6CuN | S31254 | 254SMO | ||
| 00Cr20Ni25Mo4.5Cu | 904L | 2RK65 | ||
| 00Cr25Ni22MoN | S31050 | 2RE69 |
| USA | UK | France | Germany | ISO | |||
| ASTM | ANSI | SAE | BS | NF | DIN | ||
| Al-Si Alloy | A03560 | 356 | 323 | — | A-S7G | G—AlSi7Mg (3.2371.61) | AlSi7Mg |
| A13560 | A356.0 | ||||||
| A14130 | A13/A413.0 | 305 | LM20 | A-S13 | G—AlSi12 (3.2581.01) | AlSi12 | |
| A03600 | 360 | 309 | LM9 | A-S9G | G—AlSi10Mg (3.2381.01) | AlSi9Mg | |
| A13600 | A360.0 | A-S10G | AlSi10Mg | ||||
| A03550 | 355 | 322 | LM16 | — | G—AlSi5Cu | — | |
| C33550 | C355.0 | ||||||
| A03280 | 328 | 331 | LM-24 | — | G—AlSi8Cu3 (3.2151.01) | — | |
| A03281 | 328.1 | ||||||
| A03190 | 319 | 326 | LM4 | A-S5UZ | G—AlSi6Cu4 (3.2151.01) | — | |
| A03191 | LM21 | A-S903 | |||||
| — | SC122A | LM2 | — | — | — | ||
| A03360 | 336 | — | LM13 | A-S12UN | — | AlSi12Cu | |
| A03361 | 336.1 | ||||||
| — | — | LM1 | — | G—AlSi(Cu) | — | ||
| A13570 | 357 | ||||||
| F357 | |||||||
| A03541 | 354 | — | — | — | — | — | |
| A03540 | |||||||
| Al-Cu Alloy | ＿ | ＿ | ＿ | ＿ | A-U5GT | G-AlCu4TiMg (3.1371.61) | AlCu5MgTi |
| A02950 | 295 | 38 | ＿ | A-U5GT | G-AlCu4Ti (3.1841.61) | AlCu4MgTi | |
| B295.0 | |||||||
| Al-Mg Alloy | A05200 | 520 | 324 | LM10 | ＿ | G-AlMg10 (3.3561.01) | ＿ |
| A05202 | 520.2 | 320 | LM5 | ||||
| A05140 | 514 | ＿ | ＿ | A-G6 | ＿ | AlMg6 | |
| A05141 | 514.1 | A-G3T | AlMg3 | ||||
| Al-Zn Alloy | A07120 | 7122.2 | ＿ | ＿ | A-Z5G | ＿ | AlZn5Mg |
| A07122 | |||||||
A356 is the most popular. A380 aluminum alloy is also widely used for casting general-purpose die castings. It has good mechanical properties and is used in hundreds of applications including air brake castings, gear cases and air-cooled cylinder heads.
Aluminum6061, 7075, 5052 are typically used in extrustion and not suitable for diecasting.
^ Back to top
Copper Material
| Germany DIN | Europe EN | ISO | USA UNS | China GB | ||
| OF-Cu | 2.004 | Cu-OFE | CW009A | Cu-OF | C10100 | TU1 |
| SE-Cu | 2.007 | Cu-HCP | CW021A | - | C10300 | |
| SE-Cu | 2.007 | Cu-PHC | CW020A | - | C10300 | |
| E-Cu58 | 2.0065 | Cu-ETP | CW004A | Cu-ETP | C11000 | T2 |
| SF-Cu | 2.009 | Cu-DHP | CW024A | Cu-DHP | C12200 | |
| SF-Cu | 2.009 | Cu-DHP | CW024A | Cu-DHP | C12200 | |
| SF-Cu | 2.009 | Cu-DHP | CW024A | Cu-DLP | C12200 | |
| SW-Cu | 2.0076 | Cu-DLP | CW023A | Cu-DLP | C12000 | TP1 |
| CuZn5 | 2.022 | CuZn5 | CE500L | CuZn5 | C21000 | H96 |
| CuZn10 | 2.023 | CuZn10 | CW501L | CuZn10 | C22000 | H90 |
| CuZn15 | 2.024 | CuZn15 | CW502L | CuZn15 | C23000 | H85 |
| CuZn20 | 2.025 | CuZn20 | CW503L | CuZn20 | C24000 | H80 |
| CuZn30 | 2.0265 | CuZn30 | CW505L | CuZn30 | C26000 | H70 |
| CuZn33 | 2.028 | CuZn33 | CW506L | CuZn35 | C26800 | H65 |
| CuZn36 | 2.0335 | CuZn36 | CW507L | CuZn35 | C27000 | H63 |
| CuZn37 | 2.0321 | CuZn37 | CW508L | CuZn37 | C27200 | H60 |
| CuZn36Pb1.5 | 2.0331 | CuZn35Pb1 | CW600N | CuZn35Pb1 | C34000 | |
| CuZn36Pb1.5 | 2.0331 | CuZn35Pb2 | CW601N | CuZn34Pb2 | C34200 | |
| CuZn40 | 2.036 | CuZn40 | CW509N | CuZn40 | C28000 | |
| CuZn38Pb1.5 | 2.0371 | CuZn38Pb2 | CW608N | CuZn37Pb2 | C35000 | |
| CuZn36Pb3 | 2.0375 | CuZn36Pb3 | CW603N | CuZn36Pb3 | C36000 | HPb60-2 |
| CuZn39Pb2 | 2.038 | CuZn39Pb2 | CW612N | CuZn38Pb2 | C37700 | |
| CuZn39Pb3 | 2.0401 | CuZn39Pb3 | CW614N | CuZn39Pb3 | C38500 | |
| CuZn40Pb2 | 2.0402 | CuZn40Pb2 | CW617N | CuZn40Pb2 | C38000 | HPb59-1 |
| CuZn28Sn1 | 2.047 | CuZn28Sn1As | CW706R | CuZn28Sn1 | C68800 | |
| CuZn31Si1 | 2.049 | CuZn31Si1 | CW708R | CuZn31Si1 | C44300 | |
| CuZn20Al2 | 2.046 | CuZn20Al2As | CW702R | CuZn20Al2 | C68700 | |
| CuSn4 | 2.1016 | CuSn4 | CW450K | CuSn4 | C51100 | |
| CuSn5 | 2.1018 | CuSn5 | CW451K | CuSn5 | C51000 | |
| CuSn6 | 2.102 | CuSn6 | CW452K | CuSn6 | C51900 | |
| CuSn8 | 2.103 | CuSn8 | CW453K | CuSn8 | C52100 | |
| CuNi12Zn24 | 2.073 | CuNi12Zn24 | CW403J | CuNi12Zn24 | C75700 | |
| CuNi18Zn27 | 2.0742 | CuNi18Zn27 | CW410J | CuNi18Zn27 | C77000 | |
| CuNi18Zn20 | 2.074 | CuNi18Zn20 | CW409J | CuNi18Zn20 | C76400 | |
| CuNi10Fe1Mn | 2.0872 | CuNi10Fe1Mn | CW352H | CuNi10Fe1Mn | C70600 | |
| CuNi30Mn1Fe | 2.882 | CuNi30Mn1Fe | CW354H | CuNi30Mn1Fe | C71500 | |
| ZAMAK2 | The strongest and hardest ZAMAK alloy. Generally die cast, it is occasionally employed for gravity casting |
| ZAMAK3 | The most used general purpose zinc die casting alloy, providing an excellent combination of strength, ductility and impact strength. It also provides excellent plating and finishing characteristics. |
| ZAMAK5 | |
| ZAMAK7 | |
| ZA-8 | Die Casting - Hot Chamber, provides improved performance characteristics over the ZAMAK alloys |
| ZA-12 | Die Casting - Cold Chamber, Permanent mold |
| ZA-27 | Die Casting - Cold Chamber |
| ZA-35 | Die Casting - Gravity Casting |
See ASTM B86, B791, B240, B669
Contact Form
 You may also email us at :
contact@chinasynergygroup.com ( We will reply within 12 hours ) |
 |
Copy Rights 2003-2024, China Synergy Manufacturing Co. Ltd.