Aluminum MaterialsWe are familiar with international standards, and can provide material choice recommendations.
Wrought Aluminum Alloys (those that may be shaped by extrusion, rolling, drawing, or forging).
| China | ISO | USA | Germany | Britain | France |
| (GB) | (ISO) | (AA) | (DIN) | (BS) | (NF) |
| LG5 | - | 1199 | Al99.98R | S1 | - |
| LG2 | - | 1090 | Al99.9 | - | - |
| LG1 | Al99.8 | 1080 | Al99.8 | 1A | - |
| L1 | Al99.7 | 1070 | Al99.7 | - | 1070A |
| L2 | - | 1060 | - | - | - |
| L3 | Al99.5 | 1050 | Al99.5 | 1B | 1050A |
| L5-1 | Al99.0 | 1100 | Al99.0 | 3L54 | 1100 |
| L5 | - | 1200 | Al99 | 1C | 1200 |
| LF2 | AlMg2.5 | 5052 | AlMg2.5 | N4 | 5052 |
| LF3 | AlMg3 | 5154 | AlMg3 | N5 | - |
| LF4 | AlMg4.5Mn0.7 | 5038 | AlMg4.5Mn | N8 | 5083 |
| LF5-1 | AlMg5 | 5056 | AlMg5 | N6 | - |
| LF5 | AlMg5Mn0.4 | 5456 | - | N61 | - |
| LF21 | AlMn1Cu | 3003 | AlMnCu | N3 | 3003 |
| LD2 | - | 6165 | - | - | - |
| LD7 | AlCu2MgNi | 2618 | - | H16 | 2618A |
| LD9 | - | 2018 | - | - | - |
| LD10 | AlCu4SiMg | 2014 | AlCuSiMg | - | 2014 |
| LD11 | - | 4032 | - | 38S | 4032 |
| LD30 | AlMg1SiCu | 6061 | AlMg1SiCu | H20 | 6061 |
| LD31 | AlMg0.7Si | 6063 | AlMgSi0.5 | H19 | - |
| LY1 | AlCu2.5Mg | 2217 | AlCu2.5Mg0.5 | 3L86 | - |
| LY11 | AlCu4MgSi | 2017 | AlCuMg1 | H15 | 2017A |
| LY12 | AlCu4Mg1 | 2024 | AlCuMg2 | GB-24S | 2024 |
| LC3 | AlZn7MgCu | 7174 | - | - | - |
| LC9 | AlZn5.5MgCu | 7075 | AlZnMgCu1.5 | L95 | 7075 |
| LC10 | - | 7079 | AlZnMgCu0.5 | - | - |
| LT1 | AlSi5 | 4043 | AlSi5 | N21 | - |
| LT17 | AlSi12 | 4047 | AlSi12 | N2 | - |
| LB1 | - | 7072 | SlZn1 | - | - |
Wrought alloys are the most widely used in aircraft construction as well as building industries. Wrought alloys are divided into two classes-nonheat treatable and heat treatable. Alloys 6061-T6 is used widely.
Aluminum Alloy For Casting (suitable for casting in sand, permanent mold, and die castings)
| 彚聫⒙ | USA | UK | France | Germany | ISO | ||
| ASTM | ANSI | SAE | BS | NF | DIN | ||
| Al-Si Alloy | A03560 | 356 | 323 | 彚聫㈧ | A-S7G | G彚聫㈧AlSi7Mg (3.2371.61) | AlSi7Mg |
| A13560 | A356.0 | ||||||
| A14130 | A13/A413.0 | 305 | LM20 | A-S13 | G彚聫㈧AlSi12 (3.2581.01) | AlSi12 | |
| 彚聫⒙ | A03600 | 360 | 309 | LM9 | A-S9G | G彚聫㈧AlSi10Mg (3.2381.01) | AlSi9Mg |
| A13600 | A360.0 | A-S10G | AlSi10Mg | ||||
| A03550 | 355 | 322 | LM16 | 彚聫㈧ | G彚聫㈧AlSi5Cu | 彚聫㈧ | |
| C33550 | C355.0 | ||||||
| A03280 | 328 | 331 | LM-24 | 彚聫㈧ | G彚聫㈧AlSi8Cu3 (3.2151.01) | 彚聫㈧ | |
| A03281 | 328.1 | ||||||
| A03190 | 319 | 326 | LM4 | A-S5UZ | G彚聫㈧AlSi6Cu4 (3.2151.01) | 彚聫㈧ | |
| A03191 | LM21 | A-S903 | |||||
| 彚聫㈧ | SC122A | LM2 | 彚聫㈧ | 彚聫㈧ | 彚聫㈧ | ||
| A03360 | 336 | 彚聫㈧ | LM13 | A-S12UN | 彚聫㈧ | AlSi12Cu | |
| A03361 | 336.1 | ||||||
| 彚聫㈧ | 彚聫⒙ | 彚聫㈧ | LM1 | 彚聫㈧ | G彚聫㈧AlSi(Cu) | 彚聫㈧ | |
| A13570 | 357 | 彚聫⒙ | 彚聫⒙ | 彚聫⒙ | 彚聫⒙ | 彚聫⒙ | |
| 彚聫⒙ | F357 | 彚聫⒙ | 彚聫⒙ | 彚聫⒙ | 彚聫⒙ | 彚聫⒙ | |
| A03541 | 354 | 彚聫㈧ | 彚聫㈧ | 彚聫㈧ | 彚聫㈧ | 彚聫㈧ | |
| A03540 | |||||||
| Al-Cu Alloy | ◎彥� | ◎彥� | ◎彥� | ◎彥� | A-U5GT | G-AlCu4TiMg (3.1371.61) | AlCu5MgTi |
| A02950 | 295 | 38 | ◎彥� | A-U5GT | G-AlCu4Ti (3.1841.61) | AlCu4MgTi | |
| B295.0 | |||||||
| Al-Mg Alloy | A05200 | 520 | 324 | LM10 | ◎彥� | G-AlMg10 (3.3561.01) | ◎彥� |
| A05202 | 520.2 | 320 | LM5 | ||||
| A05140 | 514 | ◎彥� | ◎彥� | A-G6 | ◎彥� | AlMg6 | |
| A05141 | 514.1 | A-G3T | AlMg3 | ||||
| Al-Zn Alloy | A07120 | 7122.2 | ◎彥� | ◎彥� | A-Z5G | ◎彥� | AlZn5Mg |
| A07122 | |||||||
A356 is the most popular. A380 aluminum alloy is also widely used for casting general-purpose die castings. It has good mechanical properties and is used in hundreds of applications including air brake castings, gear cases and air-cooled cylinder heads.
Contact Form
 You may also email us at :
contact@chinasynergygroup.com ( We will reply within 12 hours ) |
 |
Copy Rights 2003-2024, China Synergy Manufacturing Co. Ltd.